Share ETO Sterilizer.ppt - 2 MB

Share ETO Sterilizer.ppt - 2 MB

Fascinating Video Of Eto Sterilizer

Below is Fascinating video of Eto Sterilizer which is applicable in variety of industries such as Hospital,Laboratories,Pharmaceuticals,Life Saving Equipment,Food & Beverages,Textile & Garments,Medical Surgical Equipment.

Contact your need for state of ETO Sterilizer

ETO Sterilizer Manufacturers India: The Ultimate Guide To Eto Sterilizer Process

ETO Sterilizer Manufacturers India: The Ultimate Guide To Eto Sterilizer Process: ETO Sterilization is most well-liked method of sterilization in Medical devices as those devices can’t survive against the high temperatur...

The Ultimate Guide To Eto Sterilizer Process

ETO Sterilization is most well-liked method of sterilization in Medical devices as those devices can’t survive against the high temperature of most economical, well accepted low cost dry heat steam sterilizer method.

ETO Gas known as Ethylene Oxide gas is an alkaline agent that penetrates packaged medical devices to destroy microbes and thus accomplish goal of sterilization. ETO Sterilization is most acceptable method in medical device sterilization, though, ETO gas is poisonous gas so it is important to understand the process involved in ETO sterilization.

Further, Due to spontaneous nature of EO Gas, the actual ETO process must occur within enclosed chambers to prevent leaks & exposure to the ethylene oxide gas. Also EtO Sterilization is a lengthier process as it involves three stages which are pre conditioning, sterilization and Aeration.

Pre-conditioning: In this first phase, product to be sterilized passes through it which in turn enable the parasite / microbe growth. It is to preheat and humidify product loads to predefined conditions. This will assure a repeatable EO sterilization process regardless of pre-processing load storage conditions.

Sterilization: In this stage the required level of ethylene oxide is widely kept open to assure sterility for a device or family of devices.

Aeration: Lastly, the product passes through an aeration stage where even tiny droplets of ETO get removed.

ETO Sterilizer normally took 14 hour to complete this cycle.

Author:

Shreeji industries has decade of experience in designing and manufacturing the range of ETO Sterilizer for wide range of industries.

Prioritizing Eto Sterilizer Specification To Get The Most Out Of Your Sterilization need

Prioritizing Eto Sterilizer Specification To Get The Most Out Of Your Sterilization need

Shreeji industries manufacture the wide range of Eto Sterilizer for your sterilization need. Please find below selection table which will enable the customer to choose best eto sterilizer according to their need on parameters like volumetric load to be sterilized etc.

Technical Specification Selection Table:

Model Size Feets	Capacity (m3)	Sterilization Cycle Time Duration (Hours)	Pre-conditioning time	Aeration  time	Working Pressure (KG/CM2)	Working Temp (0C)	Vaccum Pump (HP)	Water Circulation Pump
2 x 2 x 4	0.45	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	1	0.5 HP
3 X 3 X 6	1.46	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	1.5	0.5 HP
4 X 4 X 6	2.72	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	1.5	0.5 HP
4 x 4 x 8	3.60	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	2	1 HP
5 x 5 x 10	6.97	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	3	1 HP
5 x 5 x 15	11.25	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	3	1 HP
6 x 6 x 15	16.2	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	5	1.5 HP
6 x 6 x 20	19.44	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	5	1.5 HP
7 x 7 x 20	26.46	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	7.5	2 HP
7 x 7 x 30	44.1	8 to 12	45-90 mins	30-60 mins	1.0 to 1.5	55 to 60	10	2 HP

For more information about Prioritizing Eto Sterilizer Specification To Get The Most Out Of Your Sterilization need

Frequently asked Question about ETO Sterilizer and ETO Sterilization

Below are most frequently asked question about ETO Sterilizer and ETO Sterilization process.

What is sterilization?

• Sterilization is a phrase referring to any process that eliminates or kills all forms of microbial life, including transmissible agents (such as fungi, bacteria, viruses, spore forms, etc.) present on a surface, contained in a fluid, in medication, or in a compound such as biological culture media. Sterilization can be achieved by applying the proper combinations of heat, chemicals, and irradiation, high reassure, and filtration.
• The term has evolved to include the disabling or destruction of infectious proteins such as prions related to Transmissible Spongiform Encephalopathy (TSE).

Type of Sterilization Methods:

There are mainly following sterilization methods are in use

• Heat based Sterilization
• Chemical based Sterilization
• Radiation sterilization

What is ETO Sterilization?

• ETO Stands for Ethylene Oxide Sterilization
• Ethylene oxide sterilization is a type of chemical process consisting of four primary variables namely gas concentration, humidity, temperature and time.
• Ethylene oxide is an alkylation agent that disrupts DNA of microorganisms, which prevents them from reproducing.
• ETO sterilization assures that a safe and sterile product will be delivered to the market each and every time.

Why & where ETO Sterilization used?

• World / industries have been praising sterilization by steam & superlative for destroying bacteria, fungi and spores.
• Steam sterilization is also most cost effective & easy to use method available but steam is not applicable to all materials and instruments. 
• Advancement in medical procedures has resulted in the increased usage of delicate instruments which can’t be steam sterilized as they cannot survive excessive temperatures or moisture of steam. So Heat and moisture sensitive equipment require alternative methods of sterilization. And that is where ETO Sterilization is used.

Fact about ETO Gas:

• ETO gas is carcinogenic, explosive and mutagenic.
• Ethylene Oxide (EtO) is a common gas used for low temperature sterilization.
• It is a colorless, poisonous gas that attacks the cellular proteins and nucleic acids of microorganisms.
• It is most commonly used to sterilize instruments with long lumens such as endoscopes and all materials that have to be sterilized but cannot withstand higher temperature. 
• EtO process temperatures from 25 - 55°C are used. A lower temperature results in a less efficient process which leads to a longer exposure time.
• EtO sterilization should be used only when another method is not appropriate.

What is ETO Sterilizer?

• ETO Sterilizer is equipment, which facilitate ETO Sterilization process.
• ETO Sterilizers are available in various capacities from 0.45m3 to 44m3 volumetric capacities to carry out ETO Sterilization.

How is sterilization cycle in ETO Sterilizer?

There are 3 phase in ETO Sterilizer

• Preconditioning
• Sterilization
• Aeration (Degassing)
• Cycle time is usually more than 14 hours.

Advantages of EtO are:

• Low temperature
• High efficiency – destroys microorganisms including resistant spores
• Large sterilizing volume/ chamber capacity
• Non corrosive to: plastic, metal and rubber materials

Disadvantages:

• Excessively Long cycle
• Safety concerns - carcinogenic to humans
• Toxicity issues - toxic residues on surgical instruments and tubing
• Not recommended for flexible scope
• EtO is flammable
• Requires special room conditions, safety equipment and separate ventilation system
• Relatively high annual costs for maintenance, servicing and consumables.

About Author: Shreeji Industries is pioneer manufacture & exporter of range of ETO sterilizer since decade. Company is based in state of Gujarat’s industrial hub at Ahmedabad and has extensive experience in ETO Sterilization field. For more information visit us at http://www.ethylenegassterilizer.com/